Wholesale Polo Shirts Supplier in Bangladesh – Polos for Brazilian Buyers
As a wholesale polo shirts supplier in bangladesh, Siatex Bangladesh supplies wholesale polos to Brazil: golden yellow pique polos built for retail ranges. The polo is a year-round staple in Brazilian menswear, worn for work and weekends alike, so a wholesale range is judged on the details that survive that life: a collar that keeps its shape, colours that hold across the range, and a flat hem that stays neat. Brazilian size labelling is offered as a programme option.
Materials: Cotton pique with a fine honeycomb texture, chosen for polos because it breathes in warm weather, holds its structure and keeps its colour through frequent washing. The fabric weight is written on the specification.
Functionality: The polo is built for daily wear: a knitted collar that sits flat, a two-button placket, short sleeves with ribbed cuffs, side vents at a flat sewn hem, and a body that keeps its shape through the wash cycle of a warm climate.
Size: Sizes XS to XXL on one graded pattern, measured on finished garments from every size before packing, with Brazilian size labels (P, M, G, GG) applied where your market needs them. Your own grading can be followed where you supply it.
Customisation: Your woven label inside the back neck, your colour range matched to approved swatches, mixed-size cartons packed to your selling pattern, and your carton marks. The full specification is approved on the pre-production sample before bulk.
Get Price: Send your sizes, colours and range plan through our contact page and a wholesale polo shirts supplier in bangladesh will reply with a quotation and a sample plan for your programme.
A wholesale polo range fails at the collar and the hem: collars that curl after three washes and hems that twist make a whole colour look tired on the rail. This page is built on the controls that stop that: the collar knitted and set to hold its line, the colour approved on a swatch before bulk, and the hem sewn flat and read straight on finished garments across every size.
The garment shown here is the programme anchor: golden yellow pique, knitted collar, flat hem, ready for your label.
Golden yellow leads the colour story shown here. Your range colours run to the same swatch standard, approved before bulk.
Fine Honeycomb Pique Body
- Cotton pique, fine honeycomb texture
- Fabric weight stated on the specification
- Colour matched to an approved swatch
- Shade read across the whole range
Collar and Placket Build
- Knitted collar holding its shape
- Two-button placket, buttons secured
- Collar set flat at the sample stage
- Stitching even at every edge
Sleeves and Hem Finish
- Short sleeves with ribbed cuffs
- Flat sewn hem, never a ribbed band
- Side vents sitting even
- Fit approved on the sample first
Range Completeness
- Sizes XS to XXL in one order
- Brazilian size labels on request
- Cartons marked by size and colour
- Standards held for the next order
Fit and Finish
- Regular fit graded from a measured pattern
- Every size checked against the sample
- Retail finish read garment by garment
- Your own grading followed on request
Polo Shirts Manufacturer in Bangladesh for Brazil Retailers
As a wholesale polo shirts supplier in bangladesh, we build the programme around how Brazilian buyers actually sell polos. A retailer runs a colour wall: six or eight shades in a full size run, reordered through the year. An importer adds uniform and promotional demand on the same base garment. Both judge the supplier on whether the reorder matches the first delivery exactly.
The buyers judge the polos on three things. The collar: flat and shaped after washing, because a curled collar ends a polo’s retail life. The colours: a range held to swatches, shade by shade. And the sizing, with local labels applied correctly where the market reads P, M, G and GG.
Every order is made to order in Bangladesh. Nothing is pulled from open stock, so the colour and the size ratios all follow your specification from cloth to carton.
How a Wholesale Polo Order Runs from Cloth to Carton
An order starts with your sizes, colours and range plan. The factory makes pre-production polos, checked for collar shape, shade and finish, so the standard you approve is the one the full range is made to.
Approving that sample is how the order is settled before any bulk cloth is cut. Your comments on fit or shade are worked into the sample first, and bulk production follows the approved polo and swatch as the standing reference.
During production the polos are checked at cutting, sewing and finishing. Finished polos are measured across the size run and counted against your ratios as cartons close, and the shipment is checked before it leaves.
Wholesale Polo Shirts Factory in Bangladesh – Pique, Collar and Button Checks
The cloth is checked first: pique even, weight as specified, and shrinkage read before cutting, because a polo body that shrinks unevenly twists at the hem. Colour is read against the approved swatch under the same light at cutting and again at finishing, across every shade in the range.
The collar gets its own read: knitted to shape, set flat, and checked after a wash test at the sample stage, with buttons pull-checked on the placket. A collar that will not sit flat does not enter production.
The BGMEA, the Bangladesh Garment Manufacturers and Exporters Association, represents the industry behind these polo programmes and its member standards.
| Product | Polo shirt, two-button placket |
|---|---|
| Fabric | Cotton pique |
| Colour | Golden yellow |
| Collar | Knitted collar |
| Sleeves | Short sleeves, ribbed cuffs |
| Fit | Regular fit |
| Sizes | XS to XXL |
| Custom options | Label, colour range, Brazilian size labels, carton marks |
Points That Keep a Polo Range Selling
Four points keep a polo range selling. The collar is built to hold its shape through the wash life of a warm climate. The colours are swatch-held, so the colour wall reorders as one wall. The hem is flat and straight, read on finished garments. And the sizes are measured in every ratio, with local labels applied exactly where the programme asks for them.
The pressing point is the fifth, and it is simple: polos are folded flat by size and colour, so they arrive ready for the colour wall or the uniform issue desk.
Our quality assurance page sets out how these checks run through production and packing, from the first sample to the sealed carton.
Wholesale Polo Shirts Exporter in Bangladesh for Argentina Importers
The standard run is XS to XXL on one graded pattern. Packing follows your selling pattern: sizes mixed per carton as your shops use them, colours kept separate and marked where a range runs more than one.
Golden yellow is the standing colour on this page. Range colours are matched to an approved swatch before bulk and held on file for repeat orders. Retailers building a full knit offer often source the base range through our polo shirts manufacturer Bangladesh line.
Polos are folded flat and counted, with cartons marked by size and colour.
Your Own Label on Wholesale Polos from a Bangladesh Wholesaler
Your woven label is sewn flat at the centre inside the back neck. Size, fibre content and care can sit on the same label or on further labels below it, set out as your market requires, with Brazilian size labels woven or printed where your programme specifies them.
Hang tags, polybag print and outer carton marks can all carry your artwork. The full label and packing set is approved with the pre-production sample, so nothing is improvised later in the run.
As a wholesale polo shirts supplier in bangladesh we hold your swatches, grading and specification on file, so a repeat order matches the polos your buyers already sell.
Where We Ship Your Polo Shirt Order
Brazil leads this programme’s shipments, and wholesale polos from this factory also ship regularly to Argentina, Chile, Peru, Colombia and Paraguay. Packing is built to each buyer’s selling pattern and season calendar.
Brazil
Brazilian retailers set the sizes and colour range first, then approve the sample and swatch against them. Cartons are mixed to each shop’s selling pattern.
Argentina
Argentine importers take polo ranges with repeats matched to the kept swatch. The record is held between orders.
Chile
Chilean buyers order polos with the full size run in one shipment. Shade is read against the stored swatch.
Peru
Peruvian retailers run polo programmes and judge the supplier on collar shape after washing. Approved samples lead every repeat.
Colombia
Colombian buyers order documented polo standards with composition stated exactly, checked at sample stage. Collars are wash-checked.
Paraguay
Paraguayan importers build polo ranges from one production standard, with the full size run shipped from one run.
Quality Checks at a Polo Shirt Maker in Bangladesh
Checks run at three points: the pre-production polo against your specification, inline shade, collar and measurement checks while production runs, and a final check of finished polos and cartons before the shipment leaves. Measurements and labels are read against the approved sample throughout.
The collar check is the one that matters most on a polo order: collars are read flat and shaped after the wash test, so a collar that curls is caught at the factory, not on the retailer’s rail.
Finished cartons are checked against the order before the shipment leaves: counts by size and colour, pack formats and carton marks all read against your packing plan.
Why Brazilian Buyers Choose a Wholesale Polo Shirts Factory in Bangladesh
Polo programmes reward a factory that knits and sews pique every week and writes its standards down. Bangladesh gives Brazilian buyers that depth of knit production at a fair cost base, with the swatch discipline colour ranges depend on. Our core range sits with the t-shirt manufacturer in Bangladesh line for mixed knit orders.
Working with a Bangladesh polo supplier that keeps your swatches and records on file means every repeat is verified against the first approved polo, not rebuilt from memory.
Siatex keeps the whole build in one place, from cloth checks to the final sealed carton, so questions are answered by the team that made the range. That single line of responsibility is what long term polo programmes are built on.
Care and Colour Life of a Pique Polo
A pique polo keeps its colour and collar when it is washed at the stated temperature and dried as the care label directs, and the dye standards are set for the frequent washing a warm climate demands. Care wording is kept short and plain for the customer who reads it.
Because the swatches, grading and size run are recorded for your programme, a repeat order matches the stock your shops already hold. A customer buying the same polo next season finds the same golden yellow on the wall.
Buyers who also source warm layers for southern winters can take them from our hoodies manufacturer Bangladesh line alongside the polo order. One factory contact across the range keeps your sourcing simple.
Frequently Asked Questions
Can sizes follow Brazilian labels?
Yes. Brazilian size labels (P, M, G, GG) are applied to the woven or printed size label where your programme specifies them, mapped from the graded pattern and approved at sampling.
How is the collar kept in shape?
The collar is knitted to shape, set flat at the sample stage and wash-checked before bulk, and finished collars are read garment by garment at finishing.
Can we run a colour range for Chilean retailers?
Yes. Your range colours are matched to approved swatches before bulk and held on file, so the colour wall reorders shade by shade without drift.
Is the bottom a hem or a rib?
A hem, always. The polo bottom is a flat sewn hem with side vents, never a ribbed band, on the front view, the back view and every garment in the run.
How do we start an order?
Send your sizes, colours and range plan through the contact page. Approving the sample first is how retailers settle the work of a polo order before any bulk cloth is cut.












