Head Office & Factory: Dhaka, Bangladesh | Sales Office: Canada (02) 222-285-548 sales@siatex.com
Fully Customizable

Custom Men’s Light Brown and White Check Shirt Manufacturer in Bangladesh

As a custom mens light brown and white check shirt manufacturer in bangladesh, Siatex builds this shirt at your level: your fine tattersall grid, your smooth matte poplin, your classic fit and your sizes graded on your own measurement chart.

The design is a small dense tattersall on a warm cream ground: thin light-brown hairlines with a muted slate line beside them, a button-down collar with pale point buttons, seven off-white front buttons, no chest pocket, and a curved shirttail hem.

Materials - A smooth lightweight cotton poplin with a matte finish, woven with the fine brown and slate grid in the cloth.

Functionality - A button-down collar that stays set all day, a long body that stays tucked, and a grid matched at the placket, yoke and cuffs.

Size - Men's sizes from XS to XXL on a regular classic block at long hip length, with neck sizes graded on your chart.

Customisation - Your label woven and sewn inside the back neck below the burgundy collar stripe, and your own grid colours on the same block.

Get Price
Custom Mens Light Brown and White Check Shirt Manufacturer in Bangladesh tattersall shirt with button-down collar front view

Custom Mens Light Brown and White Check Shirt Manufacturer in Bangladesh for Tattersall Shirts in the USA and Europe

A tattersall shirt is the quiet classic of a shirting range: a fine grid on a warm cream ground that works under a jacket and on its own. This one pairs thin light-brown hairlines with a muted slate line, finished with a button-down collar.

Siatex makes it at your level: your check matched line for line, your smooth poplin, your classic fit and your sizes graded on your own measurement chart. The sections below cover the grid, the collar, the matching discipline and the checks behind the shirt.

A Fine Grid on a Cream Ground

The pattern is a small, dense tattersall: thin light-brown lines run vertically and horizontally across a warm off-white ground, forming squares of about a centimetre. Every four to five squares, a slightly stronger line groups them into larger squares, which keeps the grid ordered at a distance.

Running parallel beside the brown lines is a thin muted slate line, the third colour that gives tattersall its depth. Where the lines cross, the tones blend softly, so the shirt reads gentle and classic rather than sharp.

Matte Poplin, Smooth and Light

The cloth is a smooth, lightweight cotton poplin with a matte finish and no sheen. Poplin is the right weave for a fine grid: the flat surface keeps the hairlines crisp, where a textured weave would blur them.

The hand feel is soft and clean, light enough for summer wear under a jacket and substantial enough to hold a collar. The weight is confirmed with you at sampling, since tattersall programmes sit anywhere between country casual and city shirting.

A Button-Down Collar

The collar is a button-down point collar in the same check, its points fastened to the shirt front with small pale buttons. That fastening is the style’s signature: the collar stays set all day, with or without a tie.

  • Button-down points with small pale buttons
  • Collar and stand cut in the same check
  • A thin burgundy stripe inside the collar stand
  • Points graded to sit flat at every neck size

Inside the top edge of the collar stand runs a thin dark burgundy stripe, a small hidden detail visible only to the wearer. It is the kind of finish that tells a customer the shirt was made with care.

Seven Pale Buttons, No Pocket

The placket is cut in the same check with no separate band, so the grid runs unbroken down the centre front. Seven small off-white buttons close it, pale against the cream ground and spaced evenly to just above the hem.

There is no chest pocket. On a fine grid, a pocket breaks the pattern and dates the shirt; leaving the chest clean keeps the tattersall looking current and lets the check carry the whole front.

Full Sleeves, Barrel Cuffs

The sleeves are full length with rectangular single-button barrel cuffs in the same check. The cuff is cut so a brown line lands at the same point on both sleeves, keeping the pair symmetrical when the shirt is laid flat.

That symmetry check is part of the final read on every check shirt. Two sleeves telling different stories are a fault, however good each one looks on its own.

A Classic Fit With a Shirttail Hem

The fit is regular and classic, straight through the body with natural shoulders and no exaggeration. The length runs long to the hip, made to tuck in and stay in, and the hem is a gently curved shirttail in the same check.

Sizes run from XS to XXL, with neck sizes and collar grading following your chart. The grid is matched at the placket and yoke so the pattern reads as one cloth from every angle.

The Back and the Yoke

The back carries a yoke across the shoulders, with the fine grid continuing in line from yoke to body. Check alignment across that seam is where a tattersall shows its making, and it is checked on the sample and again in bulk.

Below the yoke the back is plain check with no pleat detail added, keeping the classic line. The collar from behind sits clean over the yoke, the burgundy stripe hidden inside.

Your Label Under the Burgundy Stripe

Your label is woven to your artwork and sewn inside the back neck, centred below the burgundy stripe inside the collar stand. On a shirt with no pocket and no external branding, that label is the whole identity.

Care and size information follows your market’s format. Your hangtags, stickers and polybag print complete the presentation, so the shirt reaches your shelf as your product in every detail.

Where Tattersall Sells

Tattersall is a heritage pattern with steady demand: country and equestrian edits, classic menswear ranges, and smart casual programmes all carry it season after season. The cream and brown palette pairs with tweeds, cords and denim without effort.

  • Country, heritage and equestrian ranges
  • Classic menswear and gift shirting
  • Smart casual and office programmes
  • Private label staples in neutral palettes

Because the pattern is a classic rather than a fashion print, a buyer can stock it as a continuity line and reorder it across years, which is where the real volume sits.

More Check Shirts From the Same Table

The check table covers the full scale range. For a bolder grid, the royal blue with lemon check shirt carries two flap pockets, while the pastel green and cream check shirt runs a softer plaid.

The blue, white and yellow check shirt shows the large windowpane end of the range. Trade guidance for apparel exporters is published by the International Trade Centre.

Matching a Fine Grid in Bulk

A one-centimetre grid forgives nothing: a placket cut two millimetres off shows at once. The cutting plan therefore treats the front as the reference panel, with the yoke, collar and cuffs matched back to it line by line.

The final check lays the shirt flat and reads the grid across the placket, at the yoke seam and down both sleeves. A shirt whose lines step at a seam is pulled, because on this pattern the customer will see it immediately.

Sampling a Tattersall

The strike-off settles the grid first: line colours, the spacing of the small squares and the grouping lines, all against your pattern reference. On a woven check, the loom state is the product, so this approval matters more than any other stage.

The fit sample then confirms the button-down collar set, the cuff symmetry and the shirttail curve worn tucked and untucked. Once grid and fit are signed, bulk repeats them.

Packing a Cream Shirt

Each shirt is folded with the collar set and buttoned, sealed in its polybag with your stickers, and packed so the cream ground travels without marks. A pale shirt shows handling more than a dark one, so the packing line works gloved and clean.

Cartons are marked with your references, sizes and the check name. The packing list mirrors the carton marks line for line, so a warehouse can split a delivery without opening every bag.

What Buyers Ask About the Tattersall

Is the collar really button-down? Yes, both points fasten to the front with small pale buttons, and the collar can also be supplied in a standard point shape on your instruction.

Can the grid colours change? The tattersall structure takes most classic palettes; your colours are woven on a strike-off and approved before bulk, with the slate line re-toned to suit.

Why is there no pocket? The fine grid reads cleanest without one; a matched pocket can be added on your instruction, cut on the straight grain so the lines continue across it.

Reorders on a Continuity Classic

Continuity lines live on sameness: the grid spacing, the cream tone and the collar set held with the order, so this year’s shirt hangs beside last year’s without a visible step. The loom recipe and the measurement chart are filed together for exactly that reason.

That is what makes a tattersall a safe programme buy. The pattern will not date, the palette will not clash, and the making stays identical from delivery to delivery, so a customer who bought the shirt two seasons ago can buy its twin today and wear them in rotation without telling them apart.

The Slate Line, a Quiet Third Colour

The muted slate line running beside each brown hairline is easy to miss at a glance, and that is its purpose. It cools the warm cream and brown just enough to keep the shirt from reading flat, and it gives the eye a second grid to follow inside the first.

At the crossings, slate over brown deepens into a soft mauve-grey, which is where the pattern gets its depth without any bold colour. Buyers who know tattersall look for exactly this layered effect when they judge a strike-off.

Neck Sizes and the Button-Down Set

A button-down collar is graded as a system: point length, button position and stand height all move together with the neck size. If the points stay one length while the neck grows, the collar looks borrowed on the larger sizes.

The grading here keeps the points landing at the same relative place on the chest at every size, with the fastening buttons set from the approved sample. It is a small discipline that keeps a size range looking like one family.

Washing a Cream Poplin

A cream ground shows soil sooner than a dark shirt, so the poplin is finished to release wash dirt cleanly and press back to a flat, matte surface. The grid colours are wash-tested as a finished garment, because hairlines that fade unevenly would break the pattern’s order.

The care label carries your instructions in your market’s format. A tattersall that comes back from the wash with its grid intact is the one that stays in a continuity programme.

A Heritage Grid in a Modern Range

Tattersall began as a stable-yard pattern, and its modern life is wider: it sits in heritage collections beside tweeds, in country stores beside cords and boots, and in city ranges as the soft alternative to a stripe. One grid serves all three because the colours stay quiet.

That range is why buyers treat it as a foundation shirt rather than a seasonal piece. Built once, built well, it can be re-coloured gently across years without ever leaving the rail, and each delivery reads as the same shirt the customer already trusts.

Start Your Tattersall Shirt Order

Send your pattern reference, your size chart and your label artwork, and the woven strike-off and sample follow. Your grid, your poplin, your fit and your label, made in Bangladesh at your level, with the lines matched at every seam, the collar points sitting flat, and the slate line running true beside the brown from the first shirt of the order to the very last single shirt.